Duotone Cosmic 2026

Características técnicas del producto

CUSTOM CNC TECHNOLOGY

The CUSTOM CNC TECHNOLOGY is our durable sandwich construction for everyday use.

Instead of using a mould to bring the EPS foam core into its final shape each EPS block gets CNC milled. This ensures maximum precision and results in an unbeatable weight-strength ratio. Wood reinforcements effectively dampen peak loads. 

Additional glass reinforcement patches around the critical impact zones ensure structural integrity. A durable outer skin improves the impact resistance. The unfinished look gives it an exclusive, custom-made appearance. 

Deck Shape

FLAT SPOT DECK SHAPE

The center of the deck is completely flat—right where you stand. Instead of standing on a round log, it feels more like standing on a jetty; this provides a stable base for better balance and maximum control.

Grab Handle

Ensures a secure grip and comfort when carrying your board. The handle features a double-sided design, so you can hold it from either side.

Duo Structure Pads

The 4 mm thick EVA pads offer the best balance between cushioning/comfort and grip/control. The center section features our signature diamond pattern, which ensures symmetrical grip in all directions. The heat-pressed process protects the EVA against abrasion, ensuring maximum durability. The rear section features a longitudinal cord-groove pattern that provides maximum lateral grip for your back foot, even during the most radical turns. We exclusively select EVA colors that don’t look dirty even after use and won’t fade even after hours in the sun.

DUAL LEASH PLUG

Stay connected to your board at all times thanks to the integrated leash plug. Our custom designed plug features two attachment points to ensure maximum reliability and safety, so you can securely attach your leash and stay firmly connected to your board.

Tail Design

MOON TAIL

The Moon Tail behaves very similar to a swallow tail which offers enough counter-pressure for sharp and most pivotal turns. But due to the inverted curve it offers even more grip/hold and control especially in higher waves.

Outline

STABLE YET RADICAL CONCEPT

Our wave boards are approx. 1-2cm wider than most other boards.

>> The increased width results in a more stable platform. This makes our wave boards as stable as a 5 liter bigger board while drifting/floating and going over white water.

>> Most importantly the additional width leads to an increased outline curve. This improves the maneuverability which makes the board turn as radical as a 5 liter smaller board.

The result is an unbeatable broad range of use.

Rail Shape

SURFING STYLE RAILS

> Harder, pulled down rails towards the tail for maximum grip during the top turns.

> Softer beveled rails towards the nose for smooth bottom turns.

Bottom Shape

Flat single-concave into flat double-concave into opening V (front to back). 

>> In the front the flat single-concave improves the acceleration and take off on the wave.

>> Just before the front foot it transitions into a flat double-concave to ensure a stable riding position.

>> Towards the tail the V is gradually increasing which results in a disconnected rocker (flatter rocker line in the center with increased rocker along the rail). The flatter center rocker results in improved planing power while the increased rail rocker improves the water release and turn-ability.

2+1 Thruster Box System

This system consists of 2 multi fin boxes (future fin compatible) + 1 US fin box. Three surfboard-style fins of equal size create a true Thruster-fin setup that guarantees an excellent balance between maneuverability and grip on the wave. The asymmetrical side fins provide additional grip even during radical pivot turns.

Rocker Line

3-STAGE ROCKER

Unlike the usual continuous rocker curve, our entire shape concept is based on a segmented rocker line. This accounts for the fact that the top- and bottom turn are two entirely different maneuvers. While you initiate the bottom turn more over your front foot (depending on the size of the wave) the top turn is only sailed over the back foot. This change in posture is the biggest challenge, especially when learning to wave ride - which becomes much easier with our 3-STAGE ROCKER.

1) The straight rocker section in-between the feet creates a super stable sailing stance/platform so that you’re in perfect sync with your board going out or on the wave when switching between bottom- and top turn.

2) The nose rocker starts just in front of the front straps which helps to engage the front part of the rail when leaning forward on the bottom turn.

3) KICKSTARTER TAIL: The tail rocker behind the back strap remains very moderate until the last 4-5cm from the tail where it transforms into a progressive tail-kick. This tail-kick generates a perfect water release and in combination with the flat rocker line results in a kickstarter-like acceleration as soon as you push a bit with your back-foot. Plus the tail-kick obviously allows for super tight top turns when snapping back the board with your back-foot.

EVA KICK-PAD

For better grip and foot positioning in pivot turns. Prevents foot from slipping outside of the pad area during swift turns.